Connections - Yamaha YDP-101 Owner's Manual

Connections

AUX OUT
R L/L+R
1
1 AUX OUT L/L+R and R Jacks
AUX OUT
R L/L+R
Stereo System
2 PEDAL Jack
MIDI
IN OUT
3 MIDI IN and OUT Connectors
Sequencer
G PHONES Jacks
IN
PEDAL
2
The AUX OUT L/L+R and R jacks deliver the output of the YDP-101
for connection to an instrument amplifier, mixing console, PA system, or
recording equipment. If you will be connecting the YDP-101 to a monau-
ral sound system, use only the L/L+R jack. When a plug is inserted into
the L/L+R jack only, the left- and right-channel signals are combined and
delivered via the L/L+R jack so you don't lose any of the YDP-101's
sound.
• The AUX OUT jack signal is not controlled by the YDP-101's volume control.
Use the volume control on the external audio equipment to adjust the level.
This terminal is for connecting the pedal cord from the pedal box (refer
to the "Keyboard Stand Assembly" on pages 40-45).
The MIDI IN connector receives MIDI data from an external MIDI
device (such as a sequencer or MIDI instrument) which can be used to
control the YDP-101. The MIDI OUT connector transmits MIDI data
generated by the YDP-101 (e.g. note and velocity data produced by
playing the YDP-101 keyboard).
More details on MIDI are given in "MIDI Functions" on page 28.
(Bottom Panel)
Two sets of standard stereo headphones can be plugged in here for
private practice or late-night playing. The internal speaker system is
automatically shut off when a pair of headphones is plugged into either of
the PHONES jacks.
MIDI
OUT
3
9
YDP-101