F4 Left Pedal Mode; F5 Metronome Volume; F6 Piano Song Part Cancel Volume - Yamaha YDP-101 Owner's Manual

F4
Left Pedal Mode
This function sets the left pedal for normal soft-pedal operation or for song start/stop
operation. Use the [–/NO] and [+/YES] buttons to select the desired left-pedal mode. "1" is
the normal soft-pedal mode and "2" is the start/stop mode. When the start/stop mode is se-
lected, the left pedal functions in the same way as the panel [START/STOP] button. Press the
[–/NO] and [+/YES] buttons simultaneously to recall the default setting "1".
F5
Metronome Volume
I SHORTCUT: You can jump directly to the metronome functions by pressing the [FUNC-
The volume of the metronome sound can be changed. After selecting "F5", use the [–/NO]
and [+/YES] buttons to set the metronome volume as required. The volume range is from 1
through 20. A setting of "1" produces minimum sound, while a setting of "20" produces
maximum metronome volume. Press the [–/NO] and [+/YES] buttons simultaneously to recall
the default setting "10".
F6
Piano Song Part Cancel Volume
This function sets the volume at which a "canceled" part is played during piano song
playback (see page 14 for information on the "part-cancel" function). Use the [–/NO] and [+/
YES] buttons to set the volume as required. The volume range is from 0 through 20. A setting
of "0" produces no sound, while a setting of "20" produces maximum volume. Press the [–/
NO] and [+/YES] buttons simultaneously to recall the default setting "5".
Adjust the part volume to a comfortable level to use the "canceled" part as a guide to play
along with. Set to "0" if you don't want to hear the part.
TION] button while holding the [METRONOME] button.
The Function Mode
27
YDP-101