Yamaha SY85 Owner's Manual page 78

PITCH EG DATA COPY
This function facilitates voice editing by allowing the pitch EG parameters from
any other voice (the "source" voice) to be copied to the current voice. You can copy
a pitch EG setup that is close to the type you want, then edit it to produce the re-
quired sound.
PEG`COPY````````From`Voice``````````````
`````````````````````¡A1:InitVce
F1 F2
CS1 CS2
From Voice
Use the [INTERNAL 1], [INTERNAL 2], and [CARD] MEMORY keys to
select the memory area from which the source voice is to be selected. Use the
GROUP keys to select the source voice bank, then use the PROGRAM keys to
select the source voice number. The [CS5] slider and other data entry controls
can also be used to select the source voice number.
Once the source voice has been selected, press the [ENTER/YES] key. "Are
you sure?" will appear on the display.
PEG`COPY````````From`Voice``````````````
Are`you`sure`?```````¡A1:InitVce
Press the [ENTER/YES] key again to copy the pitch EG data, or press
[EXIT/NO] to cancel the copy operation. Once the copy operation has finished,
"Completed!" will appear on the display briefly, then the display will return to
the pitch EG edit mode.
F3 F4 F5
CS3 CS4 CS5
VOICE EDIT MODE /
F6 F7 F8
CS6 CS7 CS8
4:Pitch EG 77