Yamaha SY85 Owner's Manual page 156

8: SONG NAME
Your original songs should naturally have original names. This function can be
used to assign a name of up to 8 characters to the current song.
MULTI`Song`Name```````````````"InitSong"
[CLR][UPR][LWR][SPC]````````````[†]``[¥]
Name
Assigns a name of up to 8 characters to the current performance.
Use the [F7] function key to move the character cursor to the left, and the
[F8] function key to move the cursor to the right. Use the GROUP and PRO-
GRAM keys to input a character at the cursor position. Each GROUP or PRO-
GRAM key selects the three characters printed above it in sequence. It is also
possible to use the [-1] and [+1] keys or dial to scroll through the available
characters (see list below).
The sliders, [CS1] through [CS8], independently select characters for the
corresponding character position: [CS1] selects the first character, [CS2] selects
the second character, and so on.
The first four function keys also perform important functions: [F1] clears
the entire name, [F2] selects upper-case characters for GROUP and PROGRAM
key entry, [F3] selects lower-case characters for GROUP and PROGRAM key
entry, and [F4] inserts a space at the cursor position.
GROUP key PROGRAM key
SONG EDIT MODE /
MULTI EDIT 155