10: CONTROL LFO
All of the modulation-type effects — chorus, flanging, etc. — require LFO con-
trol. The SY85 has an independent effect LFO that is set up by the following param-
eters.
EF`CTRL`LFO``Waveform````Speed````Delay`
`````````````` ˚
Wave (LFO waveform)
Determines the waveform of the effect LFO.
If a controller is assigned to the "Wave" parameter (page 45), an inverse
"c" will appear to the right of the parameter.
Speed (LFO speed)
Sets the speed of the effect LFO.
"0" is the slowest speed setting, producing an LFO speed of approximately
0 Hertz. The fastest setting of 99 produces an LFO speed of approximately 25
Hertz.
If a controller is assigned to the "Speed" parameter (page 45), an inverse
"c" will appear to the right of the parameter.
Delay
Sets the delay time between the beginning of a note and the beginning of
effect LFO operation for the selected element.
The minimum setting "0" results in no delay, while the maximum setting of
"99" produces a delay of approximately 2.66 seconds before the effect LFO
begins operation.
If a controller is assigned to the "Delay" parameter (page 45), an inverse
"c" will appear to the right of the parameter.
`tri````````0````````0
PERFORMANCE EDIT MODE /
EFFECT EDIT
47