instrument or device, will have to be formatted specifically for use with the SY85.
Note that this operation will erase any existing data on the card.
224
UTILITY MODE /
2: CARD FORMAT
New memory cards, or cards that have been formatted for use with a different
CARD`Format````````````````Card=<------>
````````````````````````````````````````
F1
F2
CS1
CS2
After plugging the card to be formatted into the DATA card slot, press
[ENTER/YES] to begin the card format procedure. The following confirmation
display will appear:
CARD`Format````````````````Card=<------>
``````````````````````````Are`you`sure`?
Press [ENTER/YES] again to confirm that you want to go ahead with the
card format operation, or press [EXIT/NO] to cancel.
When the card has been formatted, "Completed!" will appear briefly on the
display.
CARD
F3
F4
F5
CS3
CS4
CS5
F6
F7
F8
CS6
CS7
CS8