Yamaha SY85 Owner's Manual page 246

If not already selected, press the PAGE [
These functions allow the volume, pitch, and loop characteristics of each
sample assigned to the waveform to be set individually. If more than one
sample is assigned, start by selecting the sample you want to edit via the
"Sample" parameter, then use the "Vol", "Pitch", "Loop", and "Typ" param-
eters to edit the specified sample.
SMPL`Data``Vol`Pitch`Loop`Typ`----------
```````````---`-----`----`---`Sample=--`
Vol (Volume)
Sets the volume of the selected sample. A setting of "0" produces minimum
volume (almost no sound), and a setting of "127" produces maximum volume.
Use this parameter to balance the levels of the different samples used in a
waveform.
Pitch
Fine-tunes the pitch of the selected range over a wide range. Minus (-)
settings decrease the pitch of the sample while plus (+) settings raise the pitch
of the sample. Each increment corresponds to a pitch change of approximately
1.7 cents (a "cent" is one-hundredth of a semitone).
l
] key to select this screen.
SAMPLE EDIT
WAVE EDIT MODE /
245