1: SAMPLE KEY MAP
2: SAMPLE DATA
After pressing the [SYNTH SETUP] SUB MODE key (actually the [EDIT] key in
the WAVE mode), the PAGE [
display for the WAVEFORM EDIT or SAMPLE EDIT functions. Select "SAMPLE
EDIT".
``SAMPLE`EDIT```````````````````````````
`````````````````````````````Hit`[ENTER]
From this entry display press [ENTER/YES].
Press [EXIT/NO] when you're ready to exit from the SAMPLE EDIT mode.
If not already selected, press the PAGE [
This function is used to "map" the samples assigned to the waveform to
specific regions of the keyboard. If more than one sample is assigned, start by
selecting the sample you want to map via the "Sample" parameter, then use the
"Org", "Low", and "High" parameters to map the specified sample.
SMPL`Map```Org``Low``High`````----------
```````````---``---``---``````Sample=--`
k
l
] and [
] keys can be used to select the entry
k
WAVE EDIT MODE /
] key to select this screen.
SAMPLE EDIT
243