1. Power
1-1. "Err" displayed on the top panel and the camera does not work
Fault details:
"Err" displayed on the top panel and the camera does not work.
Analysis results: FUSE_F600 on the MAIN PWB ASSY A side blown.
Repair details:
Replace the F600
1-2. Power supply problems
Fault details:
1. The camera does not turn on.
2. Power is supplied by the batteries but an error is displayed and the camera does not
3. "ERR" is displayed and the camera does not work. (There are reports of "ERR" being
4. No text or images appear on the LCD unless a media is inserted. The top LCD panel
5. The camera does not turn off.
Analysis results: 1. LSI defect in the IEEE 1394 interface in the MAIN PWB ASSY.
2. D600, F601, F603 or IC600 in the MAIN PWB ASSY is broken. Replacing the faulty
3. Replacing IC112 (FROM) on the MAIN PWB ASSY remedies the problem. An
4. Replacing the MAIN PWB ASSY restores normal camera operation.
5. A current of 300 mA flows simply by connecting the plug from a stable power supply
Repair details:
Replace the MAIN PWB ASSY
1-3. The camera does not turn on with the AC adapter
Fault details: The camera does not turn on with the AC adapter.
Analysis results: FUSE_F601 on the MAIN PWB ASSY A side blown.
Repair details:
Replace the F601
4
work. No AC power is supplied.
displayed during user firmware upgrades.)
displays normally but does not clear when the camera is turned off.
component remedies the problem. Presumed to be caused by an overvoltage applied
from the UNREG line (AC adapter).
interruption to the power supply during downloading causes FROM data corruption.
(DC IN 5V). (The same symptoms occur with batteries.)
Replacing the MAIN PWB ASSY restores normal camera operation.
FinePix S3Pro TROUBLESHOOTING GUIDE