Waveform Edit; Edit - Yamaha PortaTone PSR-8000 Owner's Manual

Waveform Edit

The WAVEFORM EDIT display is accessible from the SAMPLING MENU when at least one wave is in the
wave memory.
The WAVEFORM EDIT mode includes the following functions:

EDIT

1: SELECT WAVEFORM ...................................................................... 97
2: ADD WAVE ........................................................................................ 97
3: MOVE START NOTE/VOLUME/DELETE WAVE ............................. 98
NAME/CLEAR/DISK
1: WAVEFORM NAME .......................................................................... 98
2: CLEAR ............................................................................................... 98
3: SAVE ................................................................................................. 98
4: DELETE ............................................................................................. 98
STORE AS CUSTOM VOICE
1: CUSTOM VOICE NAME ................................................................... 99
2: STORE AS CUSTOM VOICE ........................................................... 99
3: CLEAR CUSTOM VOICE .................................................................. 99
Select the EDIT, NAME/CLEAR/DISK, or STORE AS CUSTOM VOICE display via the
button to the right of the display, then use the
function.
In all edit displays except ADD WAVE (see below) the
currently selected waveform and the currently selected panel voice.
While in the WAVEFORM EDIT mode, the
directly to the WAVE EDIT mode (page 93). The [EXIT] button will take you back to the SAMPLING MENU.
EDIT
.......................................................................................................
1: SELECT WAVEFORM
Use the WAVEFORM LCD dials to select the waveform to
be edited. The name of the selected waveform appears at the top
of the display.
2: ADD WAVE
This function can be used to add a wave from a different
waveform to the currently selected waveform. When a wave-
form contains two or more waves, the individual waves must be
assigned to different areas of the keyboard (the waves cannot be
"layered").
Use the SOURCE WAVEFORM LCD dials to select the
waveform containing the wave to be added, and the SOURCE
WAVE LCD dials to select the wave to be added. Use the
START NOTE LCD dials to specify the note from which the
added wave will begin playing. The START NOTE can also be
specified by pressing the appropriate key on the keyboard while
holding the [DIRECT] button. For example, if you select C3 as
the START NOTE, the original wave will play up to B2, and the
and LCD buttons to the left of the display to select the desired
LCD button can be used to switch between the
LCD button in the upper left corner of the display will take you
Sampling
and LCD
97