Dsp3; Dsp4-7; Effect Type; Type Page - Yamaha PortaTone PSR-8000 Owner's Manual

The Mixing Console

DSP3

..........................................................................................................................................................................................................
The DSP(3) block applies only to the AUTO ACCOMPANIMENT and SONG playback sound. Use the DSP(3)
controls to set the effect depth for the corresponding parts.

DSP4-7

....................................................................................................................................................................................................
These controls only appear when the [MAIN PART] display is selected DSP blocks (4) through (7) apply to the R1,
R2, LEAD, and MIC parts, respectively. Use the R1, R2, LEAD, and MIC part controls to set the DSP depth as
required.

EFFECT TYPE

The EFFECT TYPE display page includes two "sub pages" — the TYPE page and the PARAMETER page. Use the
TYPE or PARAMETER LCD button to switch between these sub-pages.

Type Page

The TYPE page allows you to assign individual effects to the
any of the PSR-8000's effect (DSP) blocks.
EFFECT BLOCK & TYPE
This window lists all 8 DSP processors (including Vocal Har-
mony) and the effect type currently assigned to each. Use the
corresponding LCD dials to select an effect block to which you
want to assign an effect type.

TYPE LIST

...........................................................................................................................................................................................
Use the TYPE LIST dials to assign a specific effect to the currently selected EFFECT BLOCK (above). Note that
the contents of the TYPE LIST may be different according to the selected EFFECT BLOCK. The "User" effects in
the TYPE LIST can be programmed as described in "USER SET", below.

Parameter Page

To access the individual parameters for each effect, go to the
PARAMETER page by pressing the PARAMETER LCD but-
ton.

BLOCK

................................................................................................

TYPE

......................................................................................................
These parameters duplicate the EFFECT BLOCK and TYPE
parameters in the TYPE page, above. The currently selected
EFFECT BLOCK and EFFECT TYPE appear near the top of the
display.
42
.................................................