10. INSTALLING THE FLUE
accessories, as described below. The boiler has been designed for connection to a
ducts using the accessory splitting kit.
WARNINGS
instructions are provided with the individual accessories.
C53
C63
be used.
TABLE 1A
table to the side.
"SECTION" D
10.1 CONCENTRIC DUCTS
This type of duct is used to discharge exhaust fumes and draw
can also be used as a supplementary curve combined with a
duct must protrude at least 18 mm from the wall to allow an
10.2 SEPARATE DUCTS
This type of installation makes it possible to discharge exhaust
Comburent air can be drawn in at a different location from that
duct adaptor (80) (B) and an air duct adaptor (A). For the air
the cap.
ducts, adapting them to various requirements. It can also be
bend.
1.50 MP - 1.60 MP - 1.70 MP
29
1.35 MP
160
270
7115196.01 (5-10/14)