Table of Contents
Advertisement
Available languages
Available languages
18.3 CHECKING THE BURNER
The burner needs no cleaning.
Check the burner surface for damage, replace the burner if necessary.
a
Flame detection probe
b
Ignition electrode
c
Burner
d
Burner surface insulation
18.4 COMBUSTION PARAMETERS
circuit (A), and allows monitoring of the quality of the combustion products and the combustion
recycling of the combustion products in case of coaxial pipelines. The following parameters can be
oxygen (
) or carbon dioxide (
carbon monoxide (
) concentration.
measurement sensor by about 80 mm (C).
To enable the " CHIMNEY SWEEP MODE
7115196.01 (5-10/14)
CG_2190
B), allowing checking of any
40
c
b
a
A
C
B) by inserting the
d
B
Advertisement
Chapters
Table of Contents
