ducts using the accessory splitting kit.
WARNINGS
C53
C63 The pressure drop of the ducts must not exceed 100 Pa
For optimal installation, the accessories supplied by the manufacturer should be used.
•
•
•
SOME OUTLET DUCT INSTALLATION EXAMPLES AND THEIR RELATIVE MAXIMUM LENGTHS ARE SHOWN IN ANNEX
AT THE END OF THIS MANUAL.
This type of installation makes it possible to discharge exhaust
B) and an air duct adaptor (A). For the
from the cap.
outlet ducts, adapting them to various requirements. It can
•
•
•
31
7651561.02 (1-03/16)