Supplement; Specifications - Yamaha MX12/6 Owner's Manual

Supplement

Specifications

I General specifications
Frequency response
(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND)
Total harmonic distortion
(CH MIC INPUT to ST, GROUP OUT/AUX, EFFECT SEND)
Hum & Noise
(Rs=150Ω, 20Hz—20kHz, INPUT GAIN=Max.,
Input Sensitivity=-60dB)
* Measured with 12.7kHz, -6dB/oct. low pass filter.
∞
(Equivalent to 20kHz, - dB/oct. filter.)
Maximum voltage gain
Monaural INPUT Gain control
Stereo INPUT Gain control
Crosstalk at 1kHz
Input channel equalization
Monaural and Stereo INPUT Peak Indicators
Meters
Graphic equalizer
Internal digital effect
Phantom power
Lamp Connector
Option
Power supply
Power consumption
Dimensions (W x H x D)
Weight
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 10A
Conformed Environment: E1, E2, E3 and E4
20Hz—20kHz +1dB, -3dB @+4dB, 600Ω (Input Gain control at minimum level)
<0.1% (THD+N) @+14dB, 20Hz—20kHz, 600Ω
-128dB Equivalent input noise
-95dB Residual output noise
-64dB (68dB S/N) ST OUT:
Master fader and one channel fader at nominal level, channel
assign switch ON.
-88dB (92dB S/N) ST OUT:
Master fader at nominal level, all channel assign switches
OFF, all GROUP to ST switches OFF.
-89dB (93dB S/N) GROUP OUT:
Master fader at nominal level, all channel assign switches OFF.
-82dB (86dB S/N) AUX SEND, EFFECT SEND:
Master level control at nominal level, all channel send controls
at minimum level.
60dB CH MIC INPUT to CH INSERT OUT
84dB CH MIC INPUT to GROUP OUT
84dB CH MIC INPUT to ST OUT (CH to ST)
94dB CH MIC INPUT to ST OUT (GROUP to ST)
76dB CH MIC INPUT to AUX1 SEND, AUX2 SEND (PRE)
86dB CH MIC INPUT to AUX2 SEND (POST) , EFFECT SEND
58dB CH LINE INPUT to ST OUT (CH to ST)
58dB ST INPUT to ST OUT (CH to ST)
44dB variable
44dB variable
-70dB adjacent input
-70dB input to output (CH INPUT)
±15dB Maximum
HIGH 10kHz shelving
MID 2.5kHz peaking
LOW 100Hz shelving
* Turn over/Roll off frequency of shelving: 3dB below maximum variable level.
Red: Each channel, when the level of the post EQ signal for each channel exceeds
+17dB the indicator will light.
12 points LED x2
7 bands (125, 250, 500, 1k, 2k, 4k, 8kHz)
±12 dB Maximum
16 types
+48V (balanced) : Supplied when the PHANTOM +48V switch is ON.
BNC type (Lamp Compatibility: AC or DC12V, 0.5A Max)
Rack Mount Kit RK124 (for MX12/6)
USA and Canadian: 120V AC 60Hz
General: 230V AC 50Hz
MX12/6: 45W
MX12/6: 438 x 85 x 384 mm
MX12/6: 7.0kg
MX20/6: 55W
MX20/6: 658 x 85 x 384 mm
MX20/6: 9.5kg
MX12/6, 20/6 — Owner's Manual
11
Supplement
0dB=0.775Vrms