Supplement; Specifications - Yamaha MV800 Owner's Manual

Supplement

Specifications

I General specifications
Frequency response (ZONE OUTPUT)
Total harmonic distortion (ZONE OUTPUT)
Hum & Noise
(Rs=150Ω, 20Hz—20kHz, INPUT GAIN Control=Max.,
INPUT PAD=OFF, Input Sensitivity=-60dB)
* Measured with 12.7kHz, 6dB/oct. low pass filter.
(Equivalent to 20kHz, ∞dB/oct. filter.)
Maximum voltage gain
Monaural input pad switch (LINE)
Monaural input gain control
Crosstalk at 1kHz
Monaural input equalizer's characteristics
Paging input pad switch (LINE)
Paging input gain control
Monaural input indicator
Stereo input indicator
Compressor indicator
Stereo channel ducker indicator
Paging indicator
Level meters
Phantom power
Accessories
Power supply
Power consumption
Dimensions (W x H x D)
Weight
For European Model
Purchaser/User Information specified in EN55103-1 and EN55103-2.
Inrush Current: 7A
Conformed Environment: E1, E2, E3 and E4
20Hz—20kHz 0+1dB, -3dB
<0.1% (THD+N) @+14dB, 20Hz—20kHz, 600Ω
-128dB Equivalent input noise
-97dB Residual output noise
-64dB (68dB S/N) ZONE OUT:
Master volume and one channel volume at nominal level.
-92dB (96dB S/N) ZONE OUT:
Master volume at nominal level, all channel assign switches
OFF.
60dB INPUT (MIC) to INSERT OUT
16dB INSERT IN to ZONE OUT
76dB INPUT (MIC) to ZONE OUT
66dB INPUT (MIC) to STACK OUT
10dB STACK IN to ZONE OUT
58.2dB INPUT (MIC) to REC OUT
23.8dB ST INPUT to ZONE OUT
76dB PAGING INPUT to ZONE OUT
26dB
44dB variable
-70dB adjacent input
-70dB input to output (CH INPUT)
-50dB between L and R (ST CH INPUT)
±15dB Maximum
HIGH 10kHz shelving
LOW 100Hz shelving
* Turn over/Roll off frequency of shelving: 3dB below maximum variable level.
26dB
44dB variable
PEAK (red): Each channel, the indicator will light when the post EQ signal
exceeds +17dB.
SIGNAL (green): Each channel, the indicator will light when the post EQ signal level
exceeds that of the noise gate's threshold level.
PEAK (red): The indicator will light when the post buffer amp signal level exceeds
+17dB.
SIGNAL (green): The indicator will light when the post buffer amp signal level exceeds
-10dB.
Orange: When the compressor is activated the indicator will light.
Orange: When the Stereo Channel Ducker is activated the indicator will light.
PEAK (red): The indicator will light when the post head amp signal level
exceeds +17dB.
SIGNAL (green): The indicator will light when the post head amp signal level
exceeds -10dB.
PAGING ON (Orange): When the ZONE Input Ducker is ON the indicator will light.
5 points (PEAK, +6, 0, -5, -10) x 2, 0=+4dB ZONE OUT @600Ω
+48V (balanced)
• Feet x 4
• 3-pin Euro-block connectors x 14
• Security Cover Set
(Security Cover, Post Screws x4, Set Screws x4)
USA and Canadian: 120V AC 60Hz
General: 230V AC 50Hz
45W
479 x 88 x 325 mm (without accessories)
7.2kg
@+4dB, 600Ω (INPUT GAIN Control at minimum level)
13
Supplement
0dB=0.775Vrms
MV800 — Owner's Manual