Selecting Accompaniment Patterns - Yamaha Electone EL-37 Owner's Manual

●

Selecting Accompaniment Patterns

This function of the Rhythm Pattern Program allows you to use one of the
Electone's Accompaniment patterns with your original rhythm pattern. You
can select the Accompaniment pattern that best matches the rhythm pattern
that you have created.
To select an appropriate Accompaniment pattern for your newly
created rhythm pattern:
1.
Select the ACC. (Accompaniment) page with the
Page buttons
<PATTERN>
2.
Select the desired rhythm group by pressing a
Rhythm button on the panel; select the rhythm type
by using the Data Control buttons on both sides of
the LCD.
<PATTERN>
3.
Try to audition the Accompaniment type.
You can also audition the Accompaniment type and set its volume from the
Rhythm Condition page. Call up this display by pressing the corresponding
rhythm button once again.
<PATTERN>
TYPE=1
Selects the Accompaniment type.
78
March
March
Selects rhythm pattern (right buttons select next
pattern, left buttons select previous one).
¡ACC.
¡ACC.
Sets volume to minimum value.
¡ACC.
VOL.=0
Decreases the volume.
PAGE
If a rhythm pattern is started in
the ACC. page, the
NOTE
Accompaniment will also be
heard. However, both the rhythm
pattern and the Accompaniment will
automatically be stopped when you
leave the page.
You cannot save the
Accompaniment type or the
NOTE
volume setting here.
Sets volume to maximum value.
Increases the volume.