Yamaha Electone EL-37 Owner's Manual page 76

EDIT Page—Step Write
2
Jump Reverse
Jump Forward
<PATTERN> 100% ¡BEAT
1.1. 1
Measure
Step Forward
Step Reverse
1
1 Step Forward and Step Reverse Controls
Each press of the corresponding Data Control buttons advances or
reverses the rhythm clock by one step. The size of a single step is
determined by the Quantize value on the panel.
Step Forward and Step Reverse are also controllable from the panel
buttons, as shown below.
RHYTHM
PROGRAM
PATTERN
SEQUENCE
2 Jump Forward and Jump Reverse Controls
Each press of the corresponding Data Control buttons advances or
reverses the rhythm clock in one-beat jumps.
3 Rhythm Clock
Displays the current position in the pattern, according to the measure,
beat, and number of clicks. A click is the smallest division of a pattern,
and one beat is made up of 24 clicks.
The rhythm clock advances up to two measure and loops back to the
beginning of the rhythm (1.1.1).
4 Track
Displays the number of the rhythm track and the instrument recorded to
it. Use the bottom right Data Control buttons to step through the tracks.
(See step #2 below; also see Change function, page 76.)
74
3
1:Ride Cym1
Beat Click Track number and
instrument name
QUANTIZE INSTRUMENT
CLEAR CHANGE
0
PRESET
3 3
0
USER
1
Step Forward
Step Reverse
4
These buttons are used to step
through the instrument track
number (left to decrease, right to
increase).
ACCENT
1 2 3 4
5 6 7 8
SET INS. DEL. CLEAR
When using the Rhythm
Pattern Program, the buttons
NOTE
on the panel function according
to the indications printed above each
button in while.
You can return to the BEAT
page in the middle of editing
NOTE
and change the time signature
and/or the Quantize value.