Selecting Accompaniment Patterns - Lower Rhythmic - Yamaha Electone EL-500 Owner's Manual

9
NOTE:
If a rhythm is started in the
Accompaniment page, the
Accompaniment will also be heard.
However, both the rhythm and the
Accompaniment will automatically be
stopped when you leave the
Accompaniment page.
9) Selecting Accompaniment Patterns
The Rhythm Pattern Program allows you to use one of the Electone's
Accompaniment patterns with your original rhythm. You can select and save
the Accompaniment pattern that best matches the rhythm that you have
created. Also, the Rhythm Pattern Program lets you use the Lower Rhythmic
function to add your own backings, two measure long lower rhythmic
patterns, to the rhythm you created.
To select an appropriate Accompaniment pattern for your newly created rhythm:
1
Select the ACC. (Accompaniment) page with the Page buttons.
2
Press the button corresponding to the desired rhythm type that
contains the accompaniment you want to use, in the Rhythm section
on the panel.
SEQ. SEQ. MARCH
1 2
USER 1
SEQ. SEQ. TANGO
3 4
USER 5
3
Select the desired rhythm from the menu with the Data Control
buttons.
The accompaniment type selected here can be saved with the user
rhythm. However, you cannot save the selection of the Accompaniment
TYPE and the changes in the Rhythm Condition page.
4
You can also call up the Rhythm Condition page from the above
display and set the Accompaniment volume to audition the rhythm.
To do this, press the same Data Control button as you did in step #3
above in selecting a rhythm, and adjust the Accompaniment volume
with the appropriate Data Control buttons.
134
RHYTHM
WALTZ SWING BOUNCE SLOW
ROCK
USER 2 USER 3 USER 4 A
LATIN 1 LATIN 2 8 BEAT 16 BEAT
USER 6 USER 7 USER 8 C
PAGE
MAX
1
B
2
D
MIN