Yamaha Electone EL-37 Owner's Manual page 88

3 INS. (Insert)
For inserting a pattern number before the current cursor position. The
new pattern is entered to the cursor position and all other patterns to the
right of the cursor are moved to accommodate the new number. The
operation is the same as for SET (see steps #2 and #3 above).
4 DEL. (Delete)
For deleting a pattern number at the current cursor position.
5 CLEAR
For erasing all patterns entered to the selected sequence. After selecting
CLEAR, the following display appears:
<SEQ> All Clear ?
[
Select "OK" to clear the currently selected rhythm sequence, or "Cancel" to
abort the operation and return to the previous display.
When patterns can no longer be entered to the sequence because of lack of
available memory space, the following display momentarily appears:
<SEQ>120:March1
If this happens, use the Delete button to erase selected patterns, or use the
Clear button to erase all patterns in the sequence.
AUDITION:
You can play the rhythm sequence at any time while you are editing or programming it by moving the
cursor to the point at which you wish to begin playback and pressing the Rhythm START button.
ABOUT USING REGISTRATIONS WITH THE RHYTHM SEQUENCE PROGRAM:
The rhythm patterns (Rhythm Menu) assigned to the sequence can be changed during editing by
selecting different registrations. This allows you to create a registration that contains the specific rhythm
patterns that you will use in a given sequence, and call up that registration when editing the sequence.
The type of Accompaniment used with the rhythm patterns also depends on the selected registration.
●
Quitting the Rhythm Sequence Function
To quit the Rhythm Sequence Program:
Press the SEQUENCE button in the RHYTHM PROGRAM section once again.
(The LED of the button will turn off.)
86
OK ] [Cancel]
Data Full...!!