Pitch Controls - Yamaha Electone EL-37 Owner's Manual

9. Pitch Controls

There are two pitch-related controls on the Electone: Transpose and Pitch. Transpose allows you to
change the key of the instrument and Pitch lets you finely adjust the tuning.
These features make it easy to change the key of a song to accommodate a vocalist's range or to
precisely match the tuning of another instrument. The Pitch controls are located on the Pitch page.
To select the Pitch page (Page 1):
Press the PITCH/MIDI button in the DISPLAY SELECT section.
<TRANS.> <PITCH>
Increases the Transpose value.
Decreases the Transpose value.
TRNS. (Transpose)
Determines the coarse pitch setting of all the voices, and is adjustable in half-
steps (semitones). Range: -6–+6 (one octave)
PITCH
Determines the fine pitch setting of all the voices.
Range: 438.8Hz–444.5Hz (Ca. a quarter semitone)
92
DISPLAY SELECT
VOICE A.B.C.
EFFECT
DISPLAY M.O.C.
FOOT REGIST. PITCH
SW. SHIFT MIDI
0 A=440.0Hz
TREMOLO
(FAST)
¡1
Increases the Pitch value.
Decreases the Pitch value.
The default Pitch is 440.0Hz
(=A3).
NOTE
The pitch changes cannot be
recorded to the Music Disk
NOTE
Recorder.