Suspensions
Front
Hydraulic upside-down fork provided with outer adjuster
for rebound, compression, and preload (for inner springs
of fork legs).
Stanchion diameter mm: 43 mm
Travel along leg axis: 130 mm
Rear
E
Of the progressive type, thanks to a rocker arm
connecting frame and upper pivot point of the shock
absorber and an arch connected at the bottom to
swingarm. The shock absorber - with separated reservoir -
enables the adjustment of rebound and compression
damping and spring preload. At the bottom pivot point it
is connected to a steel swingarm. The swingarm hinges
on a pivot pin passing through the frame and engine. The
whole system gives the bike excellent stability.
Travel: 65 mm
Rear wheel travel: 148 mm
72
Available colours
Ducati anniversary red part no. 473.101
Ducati metallic blue part no. 291.800
Ducati yellow part no. 473.201
Ducati iron grey part no. 291.600