Assigning A Name To A Pattern; Storing The Part Mute Status - Boss SP-505 Owner's Manual

Chapter 8. Creating patterns
fig.08-10
7. Press [EXIT].
You are returned to the recording standby screen.
8. Press [STOP] to exit recording.
Never turn off the power while the display indicates
"Keep Power On!"

Assigning a name to a pattern

1. Press [PTN].
2. Press [F2] (USER).
The user pattern list will appear.
3. Use the VALUE dial to select the pattern that you want
to name, and press [ENTER] to confirm your choice.
To cancel, press [EXIT].
4. Press [REC].
The recording standby screen will appear.
5. Press [F3] (NAME).
fig.08-11
6. Use CURSOR [ ][ ] to select the character location,
and use the VALUE dial to change the character at that
location.
[F1] (CAPS) toggles you between uppercase and
lowercase characters.
[F2] (INSERT) inserts a space.
[F3] (DELETE) deletes a character.
7. Press [EXIT].
You are returned to the recording standby screen.
8. Press [STOP] to exit recording.
62
Never turn off the power while the display indicates
"Keep Power On!"

Storing the part mute status

The part mute status can be stored for each part.
1. Press [PTN].
2. Press [F2] (USER).
The user pattern list will appear.
3. Use the VALUE dial to select the pattern whose mute
status you want to change, and press [ENTER] to
confirm your choice.
To cancel, press [EXIT].
4. Press [REC].
The recording standby screen will appear.
5. Press CURSOR [ ] to move the cursor to "Part Mute."
fig.08-12
6. Use the VALUE dial to specify the mute setting of the
currently selected part.
The button of the selected part will be blinking.
ON: mute
OFF: play
If you want to change the part, press PART [1]–[4] to
select the desired part.
7. Press [STOP] to return to the Play screen.
Never turn off the power while the display indicates
"Keep Power On!"