Selecting And Playing A Pattern From The Pattern List; Muting Individual Parts - Boss SP-505 Owner's Manual

Selecting and playing a
pattern from the pattern list
1. Press [PTN].
2. Press [F1] (PRESET) or [F2] (USER).
The preset pattern or user pattern list will appear.
fig.07-06
3. Use the VALUE dial to select a pattern, and press
[ENTER] to confirm your selection.
Pattern nos. 1–16 can be selected directly by pressing
pads [1]–[16].
To cancel, press [EXIT].
4. Press [PLAY] to begin playback.
If you select a different pattern while a pattern is
playing, the name of the newly selected pattern will
appear in the lower line of the screen, and it will be
reserved as the pattern to be played next. When the
currently playing pattern finishes, the reserved pattern
will automatically begin playing.
fig.07-05
5. Press [STOP] to stop playback.
Chapter 7. Playing songs and patterns

Muting individual parts

You can mute specific parts while a song or pattern is
playing.
1. Press [SONG] or [PTN].
2. Play [PLAY] to play the song or pattern.
3. Press PART [1]–[4].
Button lit: plays
Button dark: muted
The mute status of each part can be saved in the pattern.
(p. 62)
57