Rear Panel - Boss SP-505 Owner's Manual

Rear Panel

fig.00-13
(11)
AC Adaptor Jack
Connect the supplied AC adaptor (BRC series) to this jack.
* Never use any AC adaptor other than the one that was
supplied with the SP-505. Doing so can cause malfunctions.
(12)
POWER Switch
This switch turns the power on/off.
(13)
FOOT SW (Foot Switch) Jack
A separately available foot switch (FS-5U) can be connected
here, allowing you to start/stop playback of a pattern or
song.
(14)
MIDI IN/OUT Connectors
These connectors allow external MIDI devices (sequencers,
keyboards, rhythm machines, etc.) to be connected.
Use a MIDI cable (sold separately) to make connections.
(15)
DIGITAL IN Jacks OPTICAL/COAXIAL
These are input jacks for digital audio signals. Both optical
and coaxial types are provided.
( 11 ) ( 12 ) ( 13 ) ( 14 )
Names of Things and What They Do
( 20 ) ( 15 ) ( 16 ) ( 17 ) ( 18 ) ( 19 )
(16)
PHONES (Headphone) Jack
By connecting headphones, you can hear the same sound as
that output from LINE OUT. A stereo phone plug can be
connected here.
(17)
LINE OUT Jacks L/R
These are stereo RCA phono audio output jacks, which can
be used to output the sound to an amp or mixer.
(18)
LINE IN Jacks L/R
These are stereo RCA phono audio input jacks for connection
to an audio source device that you want to sample, such as a
CD player.
(19)
MIC Jack
An external mic can be connected to this jack.
(20)
Security Slot ( )
http://www.kensington.com/
13