Song Name - Yamaha Clavinova CVP-89 Owner's Manual

X
C
V
B
Use this function to enter original titles (up to 12 characters) for your Performance Memory songs.
Z
X
C
V
Select the Volume Control function — see "Selecting & Using the Utility Func-
tions", page 42. Use the TEMPO [s] and [t] buttons to turn Volume Control ON or
OFF. Once you've turned ON to engage the function you can release the [UTILITY]
button.
Use the [TAP] and [METRONOME] buttons to select the track for which you
want to change the volume level.
Use the TEMPO [s] and [t] buttons to set the volume of the selected track. The
volume range is from "0" (no sound) to "127" (maximum volume).
To re-record the initial volume value press the [REC] button then, in response to
the "ARE YOU SURE?" prompt, use the TEMPO [s] and [t] buttons to select
"YES" or "NO" as required.
To exit from this function first press the [UTILITY] button to return to the VOL-
UME CONTROL ON/OFF display, press the TEMPO [s] or [t] button while hold-
ing the [UTILITY] button to turn volume control off.
Insert the disk containing the song for which you want to enter a title.
Select the Song Name function — see "Selecting & Using the Utility Functions",
page 42. "NO/YES" will flash on the display. Press the TEMPO [s] button (YES) to
engage the Song Name function or the [t] button (NO) to cancel. Once you've
pressed the TEMPO [s] button to engage the function you can release the [UTIL-
ITY] button.
Use the [TAP] and [METRONOME] buttons to select the song for which you
want to enter a name. The existing song name will appear on the display, or "NO
SONG DATA" will appear if the selected song contains no data. "SONG 1", "SONG
2", etc. will appear if the song has not already been given a name.
Use the TEMPO [s] and [t] buttons to move the cursor to the character location
at which you want to enter a character.
Utility Functions
51