Keyboard Stand Assembly - Yamaha Clavinova CLP-175 Owner's Manual

Yamaha clavinova owner's manual clp-175
Hide thumbs Also See for Clavinova CLP-175:
Table of Contents

Advertisement

Keyboard Stand Assembly

CAUTION
• Be careful not to confuse parts, and be sure to install
all parts in the correct orientation. Please assemble
in accordance with the sequence given below.
• Assembly should be carried out by at least two per-
sons.
• Be sure to use the correct screw size, as indicated
below. Use of incorrect screws can damage the
stand.
• Be sure to tighten all screws upon completing the
assembly of each unit.
• To disassemble, reverse the assembly sequence given
below.
Have a Phillips-head (+) screwdriver ready.
TIP
The CLP-175 features an iAFC (Instrumental Active Field
Control) effect. This produces sound from the speaker
located on the bottom face of the Clavinova, enhancing the
reverberation and spaciousness of the sound when you open
the lid with the longer stay (page 17).
In order to optimize the iAFC effect, please observe the fol-
lowing:
• Perform the automatic adjustment after you turn on the
power of the Clavinova for the first time, and after each
time you re-locate the Clavinova. (page 88)
• Do not block the speaker located on the bottom face of the
Clavinova.
1.
Remove all parts from the box. Con-
firm that all parts shown in the illus-
tration are included.
Main unit
Legs
6 25 mm fixing screws 16
AC power cord
114
CLP-175
Lean the unit against the
wall as shown at right.
Pedal box
Cord holder
How to position the main unit
CAUTION
Be careful not to pinch your fingers.
Be sure to position the keyboard side on the bottom.
Spread a large soft cloth, such as a blanket, on the floor.
Place the unit on the cloth with the key cover closed
and the keyboard side on the bottom and lean the unit
against the wall so that the unit will not fall or slip.
Place a soft cloth against the wall to protect the instru-
ment and the wall from scratches.
CAUTION
Do not place the main unit with
the rear side facing down.
CAUTION
Do not lay the main unit upside
down on the floor.
CAUTION
Do not position the main unit so
that its bottom is in contact with
floor.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents