Selecting The Reverb Type [Reverbtype]; Setting The Reverb Depth [Reverbsend]; Selecting The Chorus Type [Chorus Type]; Setting The Chorus Depth [Chorussend] - Yamaha Clavinova CLP-175 Owner's Manual

Selecting the reverb type
[ReverbType]
TIP
You cannot set this parameter for the voice parts "Left"
and "Left Layer."
See the procedure on page 73.
A
C
Setting range:
Room Simulates reverberation in a room.
Hall1 Simulates reverberation in a concert hall.
Hall2 Reverberation is slightly longer than that of
"Hall1."
Stage Reverberation suitable for a solo instru-
ment sound.
Plate Reverberation from the vibration of a
metal plate.
Setting the reverb depth
[ReverbSend]*
TIP
The reverb effect is not applied if the ReverbSend
parameter is set to "0."
See the procedure on page 73.
A
C
In Dual mode:
A
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 - 127
Detailed settings for the voices [VOICE SETTING]
Selecting the chorus type
[Chorus Type]
You cannot set this parameter for the voice parts "Left"
and "Left
See the procedure on page 73.
B
NO YES
D C
Setting range:
Chorus
Celeste
Flanger
Setting the chorus depth
[ChorusSend]*
See the procedure on page 73.
C
In Dual mode:
B
NO YES
C
D
Setting range:
0 - 127
B
NO YES
D
TIP
Layer."
A
Adds a rich, spacious sound.
Adds swell and a spacious sound.
Adds swell effects of an ascending or
descending jet plane.
A
A
Voice for editing (Voice 1 or Voice 2)
B
NO YES
D
B
NO YES
D
B
NO YES
D
81
CLP-175