Setting The Chorus On/Off [Chorusonoff]; Selecting The Dsp Type [Dsp Type (Dsp)]; Setting The Speed Of The Vibraphone Vibrato Effect [Viberotorspeed(Rotorspeed)] - Yamaha Clavinova CLP-175 Owner's Manual

Detailed settings for the voices [VOICE SETTING]
Setting the chorus on/off
[ChorusOnOff]
You can set the [CHORUS] button on or off for
each voice. When you select a voice, the chorus on/
off setting for the voice automatically changes
according to this parameter.
TIP
Even if this parameter is turned on, the chorus effect is
disabled if the ChorusSend parameter is set to 0.
See the procedure on page 73.
A
C
Setting range:
On/Off
Selecting the DSP type*
[DSP Type (DSP)]
You can select other effects (than reverb and cho-
rus).
See the procedure on page 73.
A
C
Setting range:
DelayLCR
DelayLR
Echo
CrossDelay
Symphonic
RotarySpeaker
Tremolo
VibeRotor
82
CLP-175
B
NO
D
B
NO
D
Delay applied at left, center, and
right positions.
Delay applied at left and right
positions.
Echo-like delay
Left and right delays are crossed.
Adds a rich and deep acoustic
effect.
Adds the vibrato effect of a rotary
speaker.
The volume level changes in
rapid cycles.
The vibrato effect of a vibra-
phone.
AutoPan
Phaser
AutoWah
SoundBoardRev Simulates the reverberation of a
Off
Setting the speed of the vibra-
phone vibrato effect* [VibeRo-
torSpeed(RotorSpeed)]
YES
TERMINOLOGY
Rotor= The rotating portion of an electrical device etc.
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
This sets the speed of the vibrato effect that is
applied when you have selected Vibraphone and
are using the VibeRotor pedal.
See the procedure on page 73.
Setting range:
1–10
YES
The sound pans left to right and
back and forth.
The phase changes periodically,
swelling the sound.
The center frequency of the wah
filter changes periodically.
piano soundboard.
No effect.