Panel-Selectable Effects - Tremolo, Sustain, And Reverb; Tremolo - Yamaha Artiste AR-100 Owner's Manual

Panel-selectable Effects — Tremolo,
Sustain, and Reverb
The Reverb, Sustain, and Tremolo pages are called up by pressing the respective panel buttons, then
selecting the menu with the bottom left Menu button.
For example, if you press the TREMOLO button (so that the button's lamp lights), the selection
"Tremolo Menu" appears at the left of the display:
From this display, use the bottom left Menu button to call up the Tremolo page.

Tremolo

Tremolo recreates the rich, swirling sound of the popular rotating speaker effect. Just as with a
conventional rotating speaker, you can switch between slow and fast speeds. And like a motor-
driven speaker, the characteristic tremolo effect gradually changes speed after it is switched. (For
ELECTRONIC, JAZZ ORGAN, and ROCK ORGAN only.) You can also choose among different
Tremolo types and adjust the maximum speed of the effect to suit your playing style. The
Tremolo effect can be switched in real time as you play with either the front panel TREMOLO
button or the left footswitch (when properly set for footswitch operation).
Enabling the Tremolo Effect
Before using Tremolo, it must be enabled (turned on) for the appropriate Voice section in the
Voice Condtion page. (See page 34) For the Flute/Tibia and Extra Voice sections, Tremolo must
be enabled in the FLUTE VOICE and EXTRA VOICE pages, respectively. (See pages 28, 31.)
TREMOLO
(TREMULANT)
FAST
4.
Voice Controls and Effects
Tremolo Page
CAPTURE!
39