Recording - Yamaha Artiste AR-100 Owner's Manual

Recording

To record a song:
1.
Set the desired Registrations on the Electone.
Make all the settings necessary for the song you will record. This includes entering all the
Registrations you will need during the performance to Registration Memory. Make sure also to
select the Registration that you will use at the beginning of the song.
2.
Insert a formatted disk into the disk slot.
3.
Select the CONTROL PANEL page with the appropriate Menu button (if the
page is not already shown).
88
DATA CONTROL
7.
Music Disk Recorder
PAGE
COARSE
Inadvertently pressing another
panel button during M.D.R.
recording or playback may
change the content of the
display. If this happens, press
the DISK button in the
DISPLAY SELECT section to
restore the M.D.R. display.