Midi Settings; Basic Operation; Pre-Programmed Midi Templates - Yamaha 301 Owner's Manual

MIDI Settings

MIDI Settings
In this section, you can make MIDI-related settings for
the instrument. The Clavinova gives you a set of ten pre-
programmed templates that let you instantly and easily
reconfigure the instrument to match your particular
MIDI application or external device. Also, you can edit
the pre-programmed templates and save up to ten of
your original templates to the USER display. You can
then save all these original templates as a single file to
SmartMedia card or other external USB storage devices,
in the MIDI SETUP selection display (called up by
pressing [FUNCTION] → [I] UTILITY → TAB [F] SYS-
TEM RESET).

Basic Operation

1
Call up the operation (MIDI template selection)
display.
→
Function [H] MIDI
2
To use the pre-programmed templates or to edit
them
Press the TAB [√] button to select the PRESET dis-
play. Press one of the [A]–[J] buttons to select a MIDI
template.
To use the templates already saved to the USER
display or to edit them
Press the TAB [®] button to select the USER display.
Press one of the [A]–[J] buttons to select a MIDI tem-
plate.
3
To edit a template, press the [8†
ton to call up the MIDI display for editing.
The individual parameters settings are shown for the
selected template. Here you can edit each parame-
ter.
192 CVP-305/303/301 Owner's Manual
4
SYSTEM display
TRANSMIT display
RECEIVE display
BASS display
CHORD DETECT
display
5
6

Pre-Programmed MIDI Templates

† ] (EDIT) but- †
†
Use the TAB [√]/[®] buttons to call up the rele-
vant setting display.
MIDI System Settings (page 194)
MIDI Transmission Settings
(page 194)
MIDI Reception Settings (page 195)
Settings for the bass note of chord
for Style playback via MIDI recep-
tion data (page 195)
Settings for the chord type for Style
playback via MIDI reception data
page 196
( )
When you've finished editing, press the [EXIT]
button to return to the MIDI template selection
display (PRESET or USER).
Select the USER tab display to save the data by
using the TAB [√]/[®] buttons (page 63).