Yamaha 301 Owner's Manual page 183

Assignable Pedal Functions
VOLUME*
SUSTAIN
SOSTENUTO
SOFT
GLIDE
PORTAMENTO
PITCH BEND*
MODULATION*
DSP VARIATION
VIBE ROTOR ON/OFF
HARMONY/ECHO
VOCAL HARMONY (CVP-305/303)
TALK (CVP-305/303)
SCORE PAGE+
SCORE PAGE–
SONG PLAY/PAUSE
STYLE START/STOP
TAP TEMPO
SYNCHRO START
SYNCHRO STOP
INTRO1–3
MAIN A–D
FILL DOWN
FILL SELF
FILL BREAK
FILL UP
ENDING1–3
FADE IN/OUT
FING/ON BASS
Using the Footswitch or Foot Controller ([AUX PEDAL] jack)
Allows you to use a foot controller to control the volume. This function is available only
for the pedal connected to the instrument's [AUX PEDAL] jack.
Allows you to use a pedal to control the sustain. When you press and hold the pedal,
all notes played on the keyboard have a longer sustain. Releasing the pedal immedi-
ately stops (damps) any sustained notes.
Allows if you play a note or chord on the keyboard and press the pedal while holding
the note(s), the notes will sustain as long as the pedal is held. However, all subsequent
notes will not sustain. This makes it possible to sustain a chord, for example, while
other notes are played staccato.
Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces the vol-
ume and changes the timbre of the notes you play. This is effective only for certain
appropriate Voices.
When the pedal is pressed, the pitch changes, and then returns to normal pitch when
the pedal is released.
The portamento effect (a smooth slide between notes) can be produced while the pedal
is pressed. Portamento is produced when notes are played legato style (i.e., a note is
played while the preceding note is still held). Portamento Time can also be adjusted
from the Mixing Console (page 82). This function does not affect certain Natural Voices,
which would not sound appropriately with this function.
Allows you to bend the pitch of notes up or down by using the pedal. This can only be
set to the right pedal or the pedal connected to the instrument's [AUX PEDAL] jack.
Applies a vibrato effect to notes played on the keyboard. The depth of the effect
increases while pedal is pressed. This can only be set to the right pedal or the pedal
connected to the instrument's [AUX PEDAL] jack.
Switches Voice Effect DSP VARIATION on and off.
Switches the VIBRATE SW parameter on and off when the VIBE VIBRATE effect type is
selected.
Switches the HARMONY/ECHO Voice Effect on and off.
Switches the Vocal Harmony function on and off.
Switches the MIC SETTING Talk function on and off.
While the song is stopped, you can turn to the next score page.
While the song is stopped, you can turn to the previous score page.
Same as the SONG [PLAY/PAUSE] button.
Same as the STYLE CONTROL [START/STOP] button.
Same as the [TAP] button.
Same as the [SYNC START] button.
Same as the [SYNC STOP] button.
Same as the [INTRO I–III] buttons.
Same as the [MAIN VARIATION A–D] buttons.
Plays a fill-in, which is automatically followed by the Main section of the button on the
immediate left.
Plays a fill-in.
Plays a break.
Plays a fill-in, which is automatically followed by the Main section of the button on the
immediate right.
Same as the [ENDING/rit. I–III] buttons.
Same as the [FADE IN/OUT] button.
The pedal alternately switches between the Fingered and On Bass modes (page 97).
CVP-305/303/301 Owner's Manual 183