Style Playback-Related Settings - Yamaha 301 Owner's Manual

Style Playback-related Settings

Specifying the Split Point by
note name
Press the [7 π† ]/[8 π† ]
(SPLIT POINT) button. You can
specify the Split Point of the
Voice and chord section of the
keyboard by using STYLE in the
display, and you can specify the
Split Point of the left and right
Voices by using LEFT.
100 CVP-305/303/301 Owner's Manual
Style Playback-related Settings
The CVP has a variety of Style playback functions, including Split Point and many
others—which can be accessed in the display below.
1
Call up the operation display.
[FUNCTION] → [C] STYLE SETTING/SPLIT POINT/CHORD FINGERING →
TAB[ √ ] STYLE SETTING/SPLIT POINT
2
Use the [F]–[H] buttons to set the Split Point (see below) and use the
[1 π † ]–[5 π † ] buttons for each setting (page 101).
π π † † π π † †
π † π †
Parameters
• SPLIT POINT
These are the settings (there are two Split Points) that separate the different sec-
tions of the keyboard: the Chord section, the LEFT part section and the RIGHT 1
and 2 section. The two Split Point settings (below) are specified as note names.
• Split Point (S)— separates the Chord section for Style playback from the
section(s) for playing Voices (RIGHT 1, 2 and LEFT)
• Split Point (L)— separates the two sections for playing Voices, LEFT and
RIGHT 1–2.
These two settings can be set to the same note (as in the default) or two different
notes as desired.
Setting the Split Point (S) and the Split Point (L) to the same note
Chord section +
Voice LEFT
Press the [F] (S+L) button and rotate the [DATA ENTRY] dial.
Setting the Split Point (S) and the Split Point (L) to different notes
Chord section
Press the [H] (S) button or the [G] (L) button and rotate the [DATA ENTRY] dial.
Split Point (L) cannot be set lower than Split Point (S), and Split Point (S) cannot be
set higher than Split Point (L).
Split Point (S+L)
Voice RIGHT 1and 2
Split Point (L)
Split Point (S)
Voice RIGHT 1and 2
Voice LEFT
Split Point settings