Setup; Fill Gear Reducer Reservoir With Oil; Flush Before Using Equipment - Graco E-Flo 4000 Operation

4-ball pumps with sealed or open wet cup lowers

Hide thumbs Also See for E-Flo 4000:

Table of Contents

Setup

Fill Gear Reducer Reservoir with

Oil

Open the fill cap (FC) and fill the gear reducer oil reser-

voir with 2 quarts (1.9 liters) of Graco 288414 Oil (twelve

1 quart bottles). Check the oil level in the sight glass

(SG) on the gear reducer housing. Do not overfill. See

. 6.

NOTE: 2 quarts brings oil level above sight glass (SG)

when off, but level drops when operating.

. 6. Oil Fill

3A3385B

The equipment was tested with Stoddard Solvent, which

is left in the fluid passages to protect parts. To avoid

contaminating your fluid with solvent, flush the equip-

ment with a compatible solvent or water before using the

equipment. See Flushing, page 15.

ti8914a

Setup

Table of Contents

E-flo 1500 E-flo 2000 E-flo 3000