Playing Two Voices Simultaneously - Yamaha CLAVINOVA CVP-501 Owner's Manual

3
Press one of the [A] – [J] buttons to select the desired Voice.
To call up the other display pages, press one of the [1 ▲] – [5 ▲] buttons or
press the same VOICE button again.
2
To listen to the demo phrases for each Voice
Press the [8 ▼] (DEMO) button to start the Demo for the selected Voice. To
stop the demo, press the [8 ▼] button again.
4
Play the keyboard.

Playing Two Voices Simultaneously

1
Make sure that PART ON/OFF [RIGHT 1] button is turned on.
2
Press the PART ON/OFF [RIGHT 2] button to turn it on.
3
Press one of the VOICE category selection buttons to call up the
Voice Selection display for the Right 2 part.
4
Press one of the [A] – [J] buttons to select the desired Voice.
5
Play the keyboard.
The Voice selected for RIGHT 1 (page 37) and the Voice selected here are
sounded simultaneously in a layer.
Quickly selecting Voices for Right 1 and 2 parts
You can quickly select the Right 1 and 2 part Voices, just from the Voice cat-
egory selection buttons. Press and hold one Voice button, then press another.
The Voice of the first pressed button is automatically set for the Right 1 part,
while the Voice of the second pressed button is set for the Right 2 part.
38
CVP-509/505/503/501 Owner's Manual
NOTE
(CVP-509/505) You can call up the
information for the selected Voice by
pressing the [7 ▲] (INFO) button.
(Some Voices do not have the infor-
mation display.) To close the informa-
tion display, press the [EXIT] button.
NOTE
The Voice type and its defining char-
acteristics are indicated above the
Preset Voice name. For details on the
characteristics, see page 40 and the
Reference Manual.
NOTE
You can save the settings to Registra-
tion Memory. See page 79.