Connecting Audio Devices - Yamaha CLAVINOVA CVP-501 Owner's Manual

Connecting Audio Devices

Using External Audio Devices for Playback
You can connect a stereo system to amplify the instrument's sound by using the
AUX OUT [L/L+R]/[R] jacks. When using the CVP-509/505/503, the microphone
or guitar sound connected to the instrument's [MIC./LINE IN] jack is output at the
same time.
Playing External Audio Devices with the Built-in Speakers
You can connect the output jacks of an external device (such as CD player, tone
generator, etc.) to the instrument's AUX IN [L/L+R]/[R] jacks, letting you hear the
sound of that device through the built-in speakers of the instrument.
10
100
CVP-509/505/503/501 Owner's Manual
Powered speaker
Phone plug
(standard)
Audio cable
L/L+R R
AUX IN
Phone plug
(standard)
Audio cable
Input jack
Phone plug
(standard)
CD player,
Tone generator
LINE OUT
NOTE
Use audio cables and adaptor plugs
having no (zero) resistance.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
CAUTION
When the instrument's sound is
output to an external device,
first turn on the power to the
instrument, then to the external
device. Reverse this order when
you turn the power off.
CAUTION
Do not route the output from the
[AUX OUT] jacks to the [AUX IN]
jacks. If you make this connec-
tion, the signal input at the
[AUX IN] jacks is output from
the [AUX OUT] jacks. These
connections could result in a
feedback loop that will make
normal performance impossi-
ble, and may even damage both
pieces of equipment.
CAUTION
When the sound of an external
device is output to the instru-
ment, first turn on the power to
the external device, then to the
instrument. Reverse this order
when you turn the power off.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
NOTE
The instrument's [MASTER VOL-
UME] setting affects the input signal
from the [AUX IN] jacks.