Pioneer DJM-350 Service Manual page 30

1
A
5 Mode 4: For confirmation of individual
switches
Test for switches
In this Test mode, the MIC/AUX input selector,
CD/PHONO input selectors for CH1 and CH2, and
FADER curve selector can be tested.
The results of operations are basically indicated with
the level meters. (Each selector and the corresponding
level meter are shown in the figure right in different
colors.)
B
C
6 Mode 5: For confirmation of the values
of the rotary variable controls
D
Each operating element and the corresponding LED
When an operating element, activation/deactivation of
which is read at the AD port, is operated, the luminance
of the corresponding LED will change.
An AD value is internally converted for 0-1023 steps
and hysteresis is removed. The luminance of the
corresponding LED will change according to the change
in steps of the AD value.
MASTER LED
E
The values 0-1023 for the operating element being
operated are represented by the 7-block MASTER LEDs.
Intermediate values of each LED are expressed by a
difference in luminance.
F
30
1
2
DJM-350
2
3
3
4
4