Table of Contents
Advertisement
Using the Operation Panel
❖ ❖ ❖ ❖ 5.Toner Saving
You can select whether Toner Saving is available or not.
• Off
• On
Note
❒ Turning on toner saving can cause the output to become blurred and result
in very thin lines not printing at all. In the case of color printing, toner sav-
ing can cause colors to be different from those expected. Because of this,
use toner saving only for proofing and intermediate drafts, and turn it off
for final prints when top quality is important.
❖ ❖ ❖ ❖ 6.Dithering
You can select the image mode that is best for the type of data you are print-
ing.
• Auto
Select this setting to automatically select a mode that is suitable for printing.
5
• Photographic
Select this setting to print photographs.
• Text
Select this setting to print text.
❖ ❖ ❖ ❖ 7.Paper Type
You can select the paper type for printing as: Plain Paper, Thick Paper, or
OHP Transparency.
• Plain Paper
• OHP
• Thick Paper
Note
❒ Selecting an OHP Transparency as the paper type automatically adjusts in-
ternal settings to use a color profile specifically for OHP. Even though the
color profile has been optimized for OHP, the adjustments are automatic
and are not indicated on any of the dialog boxes. In this case, " Color Pro-
file" is not enabled.
❖ ❖ ❖ ❖ 8.Auto Tray SW (Auto Tray Switch)
You can select whether or not the printer will automatically switch to the oth-
er tray if it has the same paper size as the current tray when paper runs out
while printing.
• On
• Off
Note
❒ To use this feature, the optional tray unit should be installed on the printer,
and paper having the same size and direction should be loaded in both the
standard and optional trays.
88
Advertisement
Table of Contents
