Updating The Library; Updating The Project Objects - Siemens SIPLUS HCS4 00 Series Configuration

5 How to Work with the Library

5.3 Updating the library

DiagnosticErrorInterrupt [OB82] / RackOrStationFailure [OB86]
The FB "LHcs4x00_Diag82" is called in diagnostic interrupt OB 82
"DiagnosticErrorInterrupt" and the FC "LHcs4x00_Diag86" is called in module rack
failure OB 86.
1. Add the OBs "Diagnostic error interrupt" and "Rack or station failure" as new
organization blocks.
Figure 5-5
2. Then drag FB "LHcs4x00_Diag82" into OB "DiagnosticErrorInterrupt" and
generate an instance data block for it.
3. Interconnect the interface parameters according to the specifications in
4-4.
4. Drag FC "LHcs4x00_Diag86" into OB "RackOrStationFailure" and interconnect
the interface parameters according to the specification in
5.3 Updating the library
Below, you will find the steps of how to update your existing STEP 7 project with
the "LHcs4x00" V2.1 library to the latest version V2.2.
5.3.1

Updating the project objects

Below, the
HCS4x00Library
Entry ID: 109478117, V2.2.1,
Integrating the library into STEP 7 (TIA Portal)
09/2018
Figure
Figure 4-6.
is assumed.
48