Xerox DocuPrint 180 NPS Installation Planning Manual page 88

PRINTER SPECIFICATIONS AND REQUIREMENTS
6-28 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
The following table lists the turning requirements for the feeder/
stacker module.
Table 6-11. Turning radius for feeder/stacker module
Passage or doorway A width
29 inches / 73.7 cm
30 inches / 76.2 cm
31 inches / 78.7 cm
32 inches / 81.3 cm
33 inches / 83.8 cm
Note: These turning figures are based on inverter/feeder/stacker
dimensions of 28 inches / 71.1 cm by 32.25 inches / 81.9 cm.
Minimum passage B width
33 inches / 83.8 cm
32 inches / 81.3 cm
31 inches / 78.7 cm
30 inches / 76.2 cm
29 inches / 73.7 cm