Xerox DocuPrint 180 NPS Installation Planning Manual page 20

CONTROLLER COMPONENTS AND OPTIONS
2-2 XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS
Figure 2-1.
2
1
4
1 Processor
2 Monitor
3 Mouse and mouse pad
4 Keyboard
5 Diskette drive
6 CD-ROM drive
Processor The 256 MB RAM processor is the central processing unit of the Sun
workstation. It contains a power switch, an internal disk drive, a
diskette drive, a CD-ROM drive, a power receptacle and outlet,
connectors and ports.
The processor has the following components:
•
Internal disk drive: One 4.2 GB internal disk drive is provided
as a standard feature of the processor. The operating system,
the NPS application, and any queued print jobs are stored on
the internal disk. This disk cannot be used to store other
applications or data except as directed by your service
representative. Up to three optional disk drives are available in
increments of 4 or 9 GB.
•
Diskette drive: Diskettes inserted into a diskette drive are used
to load files to, and back up files from, the internal disk drive.
The diskette drive uses industry standard 3.5 inch, 1.44 MB,
double-sided, high-density diskettes. This diskette drive is not
an input source for print jobs nor any other data or application; it
is reserved exclusively for use by a service representative to
update software and to store files. The diskette drive is located
in the processor, on the right front section for the Ultra 2.
Components of the Sun Ultra 2 workstation
6
5
3