Xerox DocuPrint 180 NPS Installation Planning Manual page 41

PREPARING FOR INSTALLATION
Site preparation Select and prepare the site for DocuPrint NPS system installation
(including proper power, air conditioning, and work space). Convert
any host-resident fonts to 300 dots per inch (dpi). This conversion is
required for DocuPrint 4635 MICR NPS and 96 MICR NPS.
Network installation Install the necessary network connections required to connect client
workstations to the printer controller. Refer to the network installation
planning checklist in this chapter.
Client workstations Make sure all client workstations that will be submitting print jobs
have the proper hardware, operating system, and networking
software supported by the DocuPrint system as client platforms.
Applications Work with your Xerox systems analyst to determine requirements for
initial applications.
XEROX DOCUPRINT NETWORK PRINTER SERIES INSTALLATION PLANNING GUIDE FOR MODELS 96/4635/180 NPS 4-3