Unloading The Stacker Tray - Xerox DocuColor 7000 Operator's Manual

3. A c c e s s or ie s

Unloading the Stacker Tray

3- 1 8
Use the following procedure to unload the Stacker Tray when it is
full, or you want to retrieve a job that has been completed.
1. Press the Unload button on the Stacker Control Panel. The
Wait light blinks until the Stacker Tray has reached the down
position.
2. Open the front door when the Unload Light illuminates.
3. Position the securing bar on top of the stacked paper.
4. Pull the Stacker Cart straight out.
5. Remove the securing bar.
6. Remove the paper from the Stacker Tray.
7. Push the empty Stacker Cart straight into the HCS80.
8. Position the securing bar on the fixed area inside the HCS80.
NOTE: The front door will not close if the securing bar is not
properly attached to the stacker frame.
9. Close the HCS80 front door.
10. Follow the instructions displayed on the digital press UI to
resume printing.
Do c u Co l or 8 00 0 /7 00 0 O pe r a to r M a nu a l