Xerox DocuColor 7000 Operator's Manual page 184

6. M a i nt en a nc e
Push the corotron into the machine
6- 3 0
4. Grasp the yellow handle of the corotron and push it forward
until it stops. Be sure it is firmly set in place. A message will be
displayed on the UI if it is not seated correctly.
Pull the plastic sleeve off the bullet-pins and dispose of
according to your local regulations.
5. The UI displays a message asking if you would like to reset the
counter for the corotron unit. Follow the instructions on the
screen to reset the counter.
NOTE: Each time you remove a corotron unit and reseat it, the UI
displays a message asking if you would like to reset the counter.
In these situations, you should close the screen without resetting
the counter.
Do c u Co l or 8 00 0 /7 00 0 O pe r a to r M a nu a l
Corotron in place