Appendix C Setting Up Appsocket - Xerox 701P91273 Installation Manual

Appendix C Setting up APPSOCKET

1. Press On Line on the Control Panel . Verify the LED to the left of the button is
OUT.
2. Press
displayed.
3. Press
then press Enter.
The APPSOCKET default settings are:
<APPSOCKET>
<MODE>
The Mode options are not applicable for APPSOCKET. The setting should
NOTE:
always remain at AutoSelect .
To change the settings, follow these steps:
4. Press
5. Press
6. Press
7. Press
To enable APPSOCKET press
To disable APPSOCKET press
Enter.
8. Press
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
Menu . The ON-LINE message will disappear and TOP MENU should be
Up+ until
<COMMUNICATIONS>
=
<ENABLE> = <YES>
=
<AUTOSELECT>
Up+ until
<NETWORK SETUP>
Up+ until is displayed and then press Enter.
<TCP/IP>
until
Up+
<APPSOCKET>
Enter while
<ENABLE>
. Verify the LED to the left of this button switches ON.
On Line
appears on the Display Panel and
is displayed and then press Enter.
is displayed and then press Enter.
is displayed.
while is displayed.
Enter
<YES>
Up+ until is displayed and then press
<NO>
15-3