Stock Export Change; Default Router Preference Setting; Licenses Automatically Enabled And Activated - Xerox 6100BD - Phaser Color Laser Printer Manual

22

Stock Export change

¨ When exporting the stock library, the system will always
export both pre-installed and user defined entries.
¨ The only option the operator needs to select is the directory
for the export file.

Default Router preference setting

¨ The system administrator may now change the default router
setting. Previously, this was done when the Solaris operating
system and DocuSP software were installed, or required a
service call to change. The Default Router option is available
on the Setup pull-down menu on the DocuSP UI.

Licenses automatically enabled and activated

¨ When the Xerox service representative loads the license file,
all of the licenses are now automatically enabled and
activated. In previous releases, the Xerox Service
Representative would need to access each licensable
feature in the License Manager, and select Activate and
Enable.
DocuSP 3.6 to 3.7 Differences Document