Table of Contents
Advertisement
NIC Settings
Ethernet:
Connector Type (bnc, rj45, autoselect)
TokenRing:
Connector Type (db9, rj45, autoselect)
Ring Speed (4mbs, 16mbs)
Routing (yes/no -- source routing: enabled/disabled)
Card Address (TokenRing physical address can be set)
Reset Printer (yes/no -- resets NIC and enables any NIC changes)
Reset network card settings to factory defaults (yes/no -- resets NIC to default settings)
Read Only Settings
The following is a list of displayable NIC parameters (Read Only)
NIC Firmware Revision (NICs firmware revision)
Processor Speed (NIC processor speed)
Ethernet Address (physical layer address)
13-6
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION
Advertisement
Table of Contents
