Appendix B Setting The Ip Address With The Control Panel - Xerox 701P91273 Installation Manual

Appendix B Setting the IP address with the Control Panel

1. Press On Line button on the Control Panel . Be sure the light next to it is OFF
2. Press
displayed.
3. Press Up+ until
press Enter.
4. Press Up+ until
5. Press Up+ until
6. Press Enter while
7. Press Enter while
8. Press Up+ until
9. Press Enter while
10. Press Up+ to increase the digit value. Press Down- to decrease the digit value.
When each digit is correct, press Next button to move on to the next digit.
11. The Next button wraps around the display without setting the value if an error is
made. After the complete IP address is displayed correctly, press Enter. The IP
address is now set
12. Reset Printer to have new settings take effect.
15-2
. The ON-LINE message disappears and TOP MENU is
Menu
<COMMUNICATIONS>
<NETWORK SETUP>
is displayed and then press Enter.
<TCP/IP>
<IP ADDRESS>
<DYNAMIC>
is displayed and then press Enter.
<NO>
<SET IP ADDRESS>
appears on the Display Panel and then
is displayed and then press Enter.
is displayed.
is displayed.
is displayed.
XPrint UNIX SYSTEM PRINTER DRIVER INSTALLATION