3.
Push the tray completely into the printer.
4.
If prompted at the printer's front panel, press the OK button to accept the paper size and
type that are highlighted. If you have changed the paper size or type, do the following:
Select Change, then press the OK button.
■
■
Select Custom, then press the OK button.You are prompted to enter the custom
width and custom height.
Note
Custom Width (W)
When setting
verify that you are selecting the correct width and height values for the paper size and
orientation (long-edge feed or short-edge feed).
H
Long-Edge Feed
5.
Select
Custom Width
value, then press the OK button.
6.
Select
Custom Height
value, then press the OK button.
7.
Press the Back button two times, the press the OK button.
Custom Height (H)
and
W
5500-153
(W), press the Up Arrow or Down Arrow button to select a
(H), press the Up Arrow or Down Arrow button to select a
Phaser® 5500 Laser Printer
2-65
Custom Size Paper
5500-065
on the front panel,
W
H
5500-154
Short-Edge Feed